The Easy Quench Flameless Explosion Vent from Atex is a safe indoor venting solution for explosion protection of indoor processes in personnel areas.

This active system is used to decouple the emerging flame front. The barrier is particularly useful in reduced-pressure equipment, in combination with explosion pressure relief or explosion suppression systems

Pressure venting devices limit the over-pressure and mitigate damage to process equipment by controlled venting of the excess pressure to a safe area.

ATEX CO Systems can detect the incipient development of fire by sensing and comparing the inlet and outlet air for CO content.

This explosion barrier valve is extremely effective in flow areas with low dust concentration in the explosive category 1 and 2 range.

The ATEX Dry Chemical-based Advanced Suppression System is a multi-purpose, high-efficiency suppressor, discharging non-toxic flame-extinguishing powder into the protected plant using fast-acting non-explosively actuated valves.

The quick closing valve is part of an active explosion isolation system. In the event of ignition, it is activated by solenoid valves. Air flows out of a compressed air reservoir into the drive cylinder

The ATEX Dry Chemical-based Advanced Suppression System is a multi-purpose, high-efficiency suppressor, discharging non-toxic flame-extinguishing powder into the protected plant using fast-acting non-explosively actuated valves.

This ATEX quick sliding valve provides the operator with an easy check of the valve mechanics since the slow stroke test is more severe than the anger test

The Process exhaust air is sucked at a pressure of 700mbarg at the process temperature using an insulated heated sampling probe.